ADTRAN Total Access 1248 User Manual

Logging on to the Total Access 1248
61179641L4-5B 5-3
LOGGING ON TO THE TOTAL ACCESS 1248
To logon to the Total Access 1248 system, perform the following steps:
1. Establish the physical connection to the Total Access 1248.
2. If a craft port session is being used, proceed to step 3. If using a Telnet session proceed to
step 4.
3. Press
CTRL+R until the Login prompt appears.
The Login screen displays (see Figure 5-2).
Figure 5-2. Login Screen
NOTE
The Total Access 1248 system requires the username and
associated password.
4. Enter the default username, “ADMIN” (or the configured username with System Adminis-
trator privileges), and press
ENTER.
5. Enter the default password, “PASSWORD” (or the configured password), and press
ENTER.
NOTE
The username and password fields are case sensitive. The default
values are all uppercase. For more information, refer to “Password
Control Menu” on page 5-49.
Total Access 1248
Login: ADMIN
Password: ********

ADTRAN Total Access 1248 Specifications

General

Brand	ADTRAN
Model	Total Access 1248
Category	Network Router
Language	English