Need help?Do you have a question about the ADURO Amplify SB10 and is the answer not in the manual?
Pairs with Bluetooth devices, allows call answer/end/reject, and redial.
Switches between conversation/music, auto-connects, low battery indicator, multilink, voice prompts.
Identifies adjustable module, FWD/RWD, MFB, and volume buttons.
Details the purpose of the LED indicator light for headset status.
Recommends 3-hour charge; red light indicates charging, blue when complete.
Connects via Micro USB to a 5V source; turn off device during charging.
Instructions for switching on/off and entering Bluetooth pairing mode.
Guide to connecting the headset to a Bluetooth-enabled phone, including PIN entry.
Advice for unsuccessful pairing and automatic reconnection.
How to perform voice dial, redial, answer, and reject calls.
Operations for play, pause, skipping tracks, and adjusting volume.
Explains the meaning of red and blue LEDs during charging.
Interprets LED patterns for pairing, connection, and low power states.
Guidelines for keeping the headset in good condition and avoiding damage.
Details the warranty period, coverage, and exclusions.
States compliance with FCC Rules Part 15.
Lists Bluetooth version, profiles, range, battery life, and microphone type.
To Next Page
General