ADURO Amplify SB10 - Charging the Aduro SB10; Initial Charging and Process; Charging Connections and Safety

CHARGING
• ChargingtheAduroSB10forthefirsttime:
 Pleasebesuretochargeafull3hoursbefore
initial use
• Whenyouhear3warningtonesandatthesametimethered
 lightblinkstwotimes,itmeansthatbatteryhasalmostrunout.
Charging the battery with Micro USB cable
• Step1:InsertUSBchargingcableintoUSBportwhichhave
 support5Vpower(suchasAC/DCUSBadapterorUSBporton
 yourcomputer)
• Step2:ConnectchargingcabletotheMicroUSBchargingport
 ofheadset.
• Whentheredlightison,theheadsetisincharging.
• Whenthelightturnsblue,theheadsetisfullycharged.
• Ittakesabout3hourstochargetheheadsetfully.
Note:Whenyouhavechargingcablepluggedin,pleaseturnoffthedevice
CHARGING