ADURO Amplify SB10 - How to Use the Headset; Powering On;Off and Pairing Mode

HOWTOUSE
HOWTOUSE
Switching on / off headset
Function Operation LED Indicator Voice Prompt
Switchon  BlueLightblinks3times PowerOn
Switchoff  RedLightblinks3times PowerOff
PresstheMFBbutton
for3seconds,and
release it till the
blueLEDison
PresstheMFBbutton
for5seconds,and
release it till the red
LEDison
Pairing the headset with Bluetooth Howtoenterpairingmode
Function Operation LED Indicator Voice Prompt
EnterPairing RedandBlueLEDs Pairing
mode blink alternately
Make sure the headset
isoff.Pressandhold
MFBbuttonfor6
seconds,andreleaseit
till the red and blue
LEDSblinkalternately