Do you have a question about the Advance acoustic Terra 128B and is the answer not in the manual?
Brand | Advance acoustic |
---|---|
Model | Terra 128B |
Category | Floor Machine |
Language | English |
Safety precautions for lifting and transporting the machine.
Information on other available manuals from the manufacturer.
Symbols and notices for dangerous situations and accident prevention.
Specific warnings and cautions for machine operation and maintenance.
Key technical data and dimensions for Terra 128B and 132B models.
Visual inspection and replacement of the belt from engine to main brush.
Procedures for adjusting and replacing the main brush.
Procedures for adjusting and replacing the side brush.
Checking electrical input for the main motor, including brush checks.
Procedure for replacing the main brush and reduction unit.
Electrical input check and replacement procedure for the side brush motor.
Troubleshooting common issues with the sweeping system.
Procedure for checking and adjusting flap height and operation.
Instructions for replacing the left and right side flaps.
Procedure for replacing the front and rear flaps.
Adjusting the front flap lifting cable for Terra 132B model.
Replacing the front flap lifting cable for Terra 132B model.
Procedure for cleaning and checking the dust filter's condition.
Checking filter-shaker operation and electrical input.
Troubleshooting common issues with the suction and filter-shaker systems.
Visual inspection and adjustment of the driving belt tension.
Procedures for replacing the driving belt control cable and its sheath.
Steps for removing and installing the driving belt.
Procedures for replacing driving wheels or axle bearings.
Troubleshooting common issues related to the machine not moving.
Procedure for checking the tightening of screws and nuts on the machine.
Procedures for battery maintenance, installation, and type setting.
Instructions for replacing fuses and the electronic board.
Checking hood safety switch and machine start with charger plugged in.
Identifying components and understanding wiring diagrams.