Advanced Elements Lagoon2 AE1033 - 7 Troubleshooting

TM
14
PROBLEM
The tube is kinked or
bent.
The n is bent.
There is water in the
kayak.
The kayak dris to one
side.
SOLUTION
The tube just needs to be adjusted. When kayak is fully deated try
adjusting the position of the tube inside of the outer shell.
Aer inating the kayak, turn upside down and leave out in sun for ap-
proximately ten minutes. Fin will conform to its original shape. Even if
it is slightly bent, it will not aect the kayaks performance.
Water will drip into the kayak o of your paddle. Do not be alarmed.
Simply dry it o before puing kayak away. You can also get a spray
skirt from our accessories list from a dealer. This will help keep the
inside of the kayak dry as well as you.
A kayak will always head in the direction of your last stroke. If the tube
is not aligned inside of the cover, this will also cause dri.
7. TROUBLESHOOTING