Advanced Elements STRAITEDGE2 PRO - Assembly, Inflation, and Deflation; Initial Assembly Steps; Understanding Inflation Valves

StraitEdge2
TM
PRO Inatable Kayak Owner’s Manual
7
3. ASSEMBLY/INFLATING/DEFLATION INSTRUCTION
3.1 ASSEMBLY
Your kayak comes from the factory pre-assembled. The only assembly you should need to do
is attach the adjustable seats, foot pegs, and n. Follow the instructions and gures on the next
pages for installing the foot pegs and tracking n.
3.2 UNDERSTANDING YOUR VALVES
Advanced Elements StraitEdge2
TM
kayak uses the following valves. The 2-way military valve has
the function and durability of other military type valves and is compatible with most standard
pumps. The following gures will have details on how to operate the valves.
TO INFLATE: use nger to push in center stem, rotate ¼ turn, and allow stem to spring up into
the up/outward position.
TO DEFLATE: Use nger to push in center stem and rotate ¼ turn to lock stem down/inward.
Fishing Rod Holders
Drop-Stitch Floor
Molded Rubber
Handle
StraitEdge
TM
System
Paddle holder
2-Way Military
Valves
Durable PVC
Tarpaulin hull material
Tracking Fin
Adjustable Foot Braces
Self Bailing Ports
High-Back Lumbar Seats
Bungee Deck Lacing
& Mesh Pocket