EasyManua.ls Logo

ADVANCED EV A-Series - Pre-Operation Checks (Continued); Steering, Alarm, and Pedal Checks; Battery Care Guidelines and Warnings

ADVANCED EV A-Series
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
W A R N I N G
A
Brake pedal
16
B
Accelerator pedal
17
Steering system
Check the steering system whether
there is too much empty steering
a.Put the steering wheel up and down,
front and back
b.Turning the steering wheel left or
right
If you find too much empty steering or
hear noise, it means some parts wrong
and please contact dealer immediately.
Reverse alarm
Turn t h e F/R switch to R for
checking reverse alarm
Pedal operation
Check the pedals operation, if it’s
abnormal, contact dealer immediately.
Brake pedal
When step down the pedal, you feels
well, release it to be original position.
PRE OPERATION
Accelerator pedal
Check the flexibility and reliability
of p e da l, it returns to ori g i nal
position after step down.
Before checking the accelerator
pedal, make sure to turn off the
main switch
Battery Care
WARNING
WARNING
Keep out reach of children.
CAUTION
MAINTENANCE
Do not allow cleaning material to
enter battery cells.
battery electrolyte is poisonous and
dangerous, causing severe burns, etc. It
contains sulfuric acid. Avoid contacting
with skin, eyes and clothes.
Antidote:
EXTERNAL: Flush with water
INTERNAL: Drink large quantities of
water or milk. Follow with milk of
magnesia, beaten egg, or vegetable oil.
Call physician immediately.
EYES: Flush with water for 15 minutes
and get prompt medical attention.
Batteries produce explosive gases. Keep
sparks, flames and cigarettes away.
Make sure it is ventilated when charging
or using in enclosed space.Always shield
eyes when working near batteries.
Batteries provide power for your electric car and must be
properly maintained and recharged for maximum
performance and service life.The ways to maintain
your batteries.
1. Clean the top of the batteries with soda water if necessary
to remove corrosion.
2. Check the fluid level before and after charging.
A
B

Related product manuals