12
OPERATION AND CONTROL
WARNING
Turning On Main Switch
1,Shifting the switch to RUN position
then can turn on the power supply of
car.
2,Shifting the switch to OFF position
then can turn off the power supply of
car.
Key Switch
1、Plugging in the key and turn right
t h e n c a n t u r n o n t h e k e y
switch(Note:Shifting the F/R switch
to the middle position before turning
on Main switch).
2、Turning left and then can turn off
the switch.Switch can be removed
only at this state.
Forward/Reverse Switch
The Forward/Reverse Switch is used
to shift the car to forward,reverse or
stop.Forward for upward,Reverse for
dow nward,Park for middle.W hen
choosing reverse switch,the reverse
buzzer sounds.
C o m p l e t e l y s t o p p i n g c a r b e f o r e s h i f t i n g F / R
switch.When shifting F/R switch,please turn switch to
middle positon for 2s at first,then choosing Forward
switch or Reverse switch.Don’t shifting F/R switch in a
hurry in case that the sensor will be burnt or switch will
be out of use.
行驶
R U N
关闭
O F F
关闭
打开
13
Voltage Indicator
Voltage Indicator is to show the
electricity and remains custom to
charge on time.The voltage will
shows fulled charged when charing
enough time.
1、Electricity display reduce with the
consumption of electricity during
working;
2、 When electricity is close to little
electricity warning,it was showed by
moving betwe e n fi r s t sp ace and
second space;
3、 When electricity enters into
un d er-e l ec t ric i ty war n in g ,it wa s
displayed by flashing of first space in
left.
Head light switch
Turning light switch
Turn on the key switch, choose
forward or backward, release
brake, put your right foot on the
accelerator pedal, soft step down
the pedal to start the car.
Attention: don’t step down the
pedal to the end in rush.
Accelerator pedal
OPERATION AND CONTROL
48V
1
0
To Next Page
Loading...
