12
R U N
O F F
OFF
RUN
13
48V
1
0
Turning on Main Switch
1. Shifting the switch to RUN position
then can turn on the power supply of
car.
2. Shifting the switch to OFF position
then can turn off the power supply of
car.
Completely stopping car before shifting F/R switch. When shifting F/R
switch, please turn switch to middle position for 2s at first, then choosing
Forward switch or Reverse switch. Don't shift F/R switch in a hurry
in
case that the sensor will be burnt or switch will be out of use.
Forward/Reverse Switch
The Forward/Reverse Switch is used to
shift the car to forward, reverse or
stop. Forward for upward, Reverse for
downward, Park for middle. When
choosing reverse switch, the reverse
buzzer sounds.
Key Switch
1. Plugging the key and turn right then
can turn on the key switch (Note:
Shifting the F/R switch to the middle
position before turning on key switch).
2. Turning left and then can turn off the
switch. Switch can be removed only at
this state.
Voltage Indicator
Voltage Indicator is to show the
electricity and remains custom to
charge on time. The voltage will show
full charged when charing enough time.
1. Electricity display reduce with the
consumption of electricity during
working.
2. When electricity is close to little
electricity warning, it is shown by
moving between first space and second
space;
3. When electricity enters into under-
electricity warning, it is displayed by
flashing of first space in left.
Head light switch
Turning light s
witch
Accelerator pedal
Turn on the key switch, choose forward
or backward, release brake, put your
right foot on the accelerator pedal, soft
step down the pedal to start the car.
Attention: don't step down the pedal to
the end in rush.
Operation And Control
Operation And Control
To Next Page
Loading...