Additional Items Required to Complete the Pitts Special:
• 2 x Standard size high torque, metal geared servos for aileron control
•
2 x Standard size high torque, metal geared servos for rudder and elevator
•
1 x Standard servo for throttle
•
High capacity receiver battery and heavy duty switch harness
• 5 and 30 Minute epoxy glue
• Medium and thin CA adhesive
• Masking and clear tape
• 1.20 cu in 4 stroke engine with flexible manifold and 16" x 8 " propeller
Safety Warning:
This R/C aircraft is not a toy. Serious injury or damage to property can result through misuse and abuse. It is
recommended that this aircraft is flown at a dedicated R/C flying site and that a qualified instructor thoroughly
checks over the model before its first flight.
Your local model shop should be able to assist you regarding flying clubs in your area.
_____
Page 2
_____
To Next Page
Loading...
