27
5.4 History
alarm delay period and the USB history save format.
INTERVAL - The amount of time between each
history time stamp for probe readings.
W/M HOUR - The time of day that the daily water
meter history cycle is to start.
ALARM DELAY - The amount of time an alarm has to
be on before it is recognized as an alarm.
SAVE FORMAT - The USB history save format.
5.5 Flow Switch
5.6 Temperature Scale
This menu is used to select the type of temperature scale to display.
5.7 Network
The Network menu is used when a controller is being remotely communicated with either a local network
connection or over the internet on the WebAdvantage server. IP Address, IP Mask, Gateway, and other
information can be viewed from this menu.
SETTINGS - This menu is used for setting up the
remote WebAdvantage communications and is
covered in a separate manual.
http://www.advantagecontrols.com/downloads/pdf/M-WebAdvantage.pdf
Note: The Network card must be RESET after making any
changes to Network setting in order to save changes and
reset communications.
5.8 System Information
serial number.
To Next Page
Loading...
