Advantage Controls MegaTronMT - Specialized Wiring Diagrams; Pyxis Fluorometer Wiring; Autorol Turbine Meter Wiring

35
Incoming Power
GND
Display Interface
Power to display
Gnd
Gnd
-12
-12
+12
+12
+5
+5
Jumper Block
Spare Power
Pyxis STA-525 series sensors
Wiring for
MegaTron MT
Note: Refer to
full manual for
additional
information
LED
Cable
LED
Input 1 +
Input 1 -
WHITE (+4-20)
GREEN (-4-20)
RED (+) 12 VDC
BLACK ( - ) 12 VDC
Incoming Power
GND
Display Interface
Power to display
-12
-12
+12
+12
+5
+5
Jumper Block
Spare Power
LED
Cable
LED
Input 1 +
Input 1 -
WHITE (+4-20)
RED (+) 12 VDC
BLACK ( - ) 12 VDC
Wiring for STA-525 (and H) serial numbers under
220011
Wiring for STA-525SS serial numbers under 210086
Wiring for STA-525 (and H) sensors serial numbers greater than 220011
Wiring for STA-525SS sensor serial numbers greater than 210086
Pyxis changed the
wiring on the 525
series of sensors
in late 2022 so that
there is not a -4-20
wire. The green is
still there but not
used.