1-2-5 Industrial standard Modbus/TCP protocol supported for open connectivity
ADAM-6000 modules support the popular industrial standard, Modbus/TCP protocol, to connect with
Ethernet Controller or HMI/SCADA software built with Modbus/TCP driver. Advantech also provides
OPC server for Modbus/TCP to integrate ADAM-6000 I/O real-time data value with OPC client enabled
software. Users don’t need to take care of special drivers development.
1-2-6 Customization Web Page
Since ADAM-6000 modules built in a default web page, users has allowed to monitor and control the I/O
status in anywhere through Internet Explorer Browser. Move over, the ADAM-6000 modules could be
downloaded the user-defined web page for individual applications. Advantech has provided sample
programs of JAVA Script for users’ reference to design their own operator interface, then download it into
the specific ADAM-6000 modules via Windows Utility.
1-2-7 Software Support
Based on the Modbus/TCP standard, the ADAM-6000 firmware is a built-in Modbus/TCP server.
Therefore, Advantech provides the necessary DLL drivers, OPC Server, and Windows Utility for users
for client data for the ADAM-6000P. Users can configure this DA&C system via Windows Utility;
integrate with HMI software package via Modbus/TCP driver or Modbus/TCP OPC Server. Even more,
you can use the DLL driver and ActiveX to develop your own applications.
To Next Page
Loading...
Need help?
General
