Advantech ADAM-6000 series - Page 139

$aaCjAhs Set Alarm Mode Set the High/Low alarm in either
Momentary or Latching mode
$aaCjAh Read Alarm Mode Returns the alarm mode for the
specified channels
$aaCjAhEs Enable/Disable AlarmEnables/Disables the high/low alarm
of the specified channels
$aaCjCh Clear Latch Alarm Resets a latched alarm
$aaCjAhCCn Set Alarm
Connection
Connects the High/Low alarm of a
specified input channel to interlock
with a specified output channel
$aaCjRhC Read Alarm
Connection
Returns the alarm configuration of a
specified input channel
$aaCjAhU Set Alarm Limit Set the High/Low alarm limit value
to a specified channel
$aaCjRhU Read Alarm Limit Returns the High/Low alarm limit
value of the specified channel
$aaCjS Read Alarm Status Reads whether an alarm occurred in
the specified channel
$aaCjAhs