A.1 Install VESA Mounting
The PDC-W240 also provides standard VESA mounting to help system
integrators conveniently integrate the panel PC into their system.
Never use mounting brackets except as provided by Advantech to prevent
unreliable mounting of the PDC-W240. VESA mount installation should be
carried out by a professional technician; please contact a service technician
or your retailer if you need this service.
Installation instructions follow:
1. First attach wall-mounting to the heat-sink of the PDC-W240, securing
it in place with the four Phillips-head screws provided.
2. Mount the unit on the wall, stand or other flat surface.
Warning! Be sure to secure the screws of the mounting bracket tightly. A
loose joint between the PDC-W240 and mounting bracket may
create danger of injury.
To Previous Page
Loading...
Need help?
General
