B. Advanced Page
Users could setup the advanced characteristics of network packet for
transmission on this page.
1. Beacon Interval
This filed indicates the interval between each beacon that this AP sends out in
unit of TU (1024 micro-seconds).
2. DTIM Period
The DTIM Period field is the number of Beacon intervals between successive
DTIMs.
3. Preamble Mode
Long: higher quality but with lower performance than preamble short
mode.
Short: Normal quality but with higher performance then preamble long
mode.
Auto: select the proper preamble mode by current signal frame
information.
To Next Page
Loading...
Need help?
General
