ADVATEK LIGHTING PixLite A4-S Mk3 - Page 18

- 18 -
www.advateklights.com PixLite A4-S Mk3 User Manual V211013
5. You should now be able to access the device’s Management Interface by
browsing to 192.168.0.50 in your web browser.
After establishing a connection to the device, make sure to configure the IP address
settings for future communication and save the configuration.
Note: The Factory IP is only a temporary setting used to regain connectivity to the
device. When the device is reset (powered off and on again), the IP address settings
will revert to what is configured in the device.