Why does my Advent AMM12N reset itself?
If your Advent Car Video System unit resets itself when the engine is off, the cause may be an incorrect connection between the ACC and the positive battery wire. Check the wiring and correct it.
Why is my Advent AMM12N not playing discs?
If your Advent Car Video System is not playing a disc, there are several things you can check. First, make sure the disc isn't warped or scratched; if it is, use a disc in good condition. If the disc is dirty or wet, clean it with a soft cloth. The laser pickup might also be dirty, so clean it with a cleaning disc. Ensure you are using a compatible disc. If the disc rating exceeds the Parental Lock rating limit, change the Parental Lock settings to lower the restriction. Verify that the disc region code is compatible with the unit. Finally, make sure the disc is inserted with the label side up.
Why is the image on my Advent Car Video System blurred?
If the image on your Advent Car Video System is blurred, distorted, or dark, it may be because the disc you are using is an illegally copied disc. Use an original disc to resolve this issue.
What to do if my Advent AMM12N Car Video System screen has a flashing image?
If you are experiencing a flashing image or interference on the screen of your Advent Car Video System, it could be due to DVD incompatibility with the current TV system settings. Change the setup to accommodate the disc. Another potential cause is improper video signal connections, so check the wiring and correct it if necessary.
Why is my Advent AMM12N Car Video System sound quality poor?
If your Advent Car Video System is producing poor sound quality or distortion, the issue might be related to the disc you're using. If you're using a pirated disc, switch to an original copy. Also, ensure that the speaker power rating is compatible with the unit by connecting proper speakers. Finally, check the speaker contact to make sure the speaker is not shorted.
How to fix an Advent AMM12N Car Video System remote control that is not functioning?
If the remote control for your Advent Car Video System isn't working, the first thing to check is the battery. If the battery is depleted, replace it with a new one. If that doesn't solve the problem, remove the battery and reinstall it correctly, ensuring it's properly aligned.
Why is the audio output low on my Advent AMM12N Car Video System?
If you're getting no or low audio output from your Advent Car Video System, start by checking the wiring of your audio output connections and correct them if necessary. Ensure the volume isn't set too low by increasing the volume level. Review the wiring diagram to check the “MUTE” connection. Damaged speakers can also cause this issue, so consider replacing them. Heavily biased volume balance may be the reason, so adjust the channel balance to the center position. Finally, ensure that speaker wiring is not in contact with any metal part of the car, and insulate the connections if it is.
General| Touchscreen | Yes |
|---|---|
| Bluetooth | Yes |
| Wi-Fi | Yes |
| GPS | Yes |
| USB Ports | 2 |
| HDMI Input | No |
| Rear Camera Input | Yes |
| Steering Wheel Control | Yes |
| Resolution | 1024 x 600 pixels |
| Operating System | Android |
Crucial safety step to disconnect the battery before installation to prevent short circuits.
Step-by-step guide for installing the unit into a standard 2.0 DIN dashboard opening.
Instructions for installing the unit using the provided half-sleeve and mounting brackets.
Guide on how to connect the MediaLink for external AV device integration without removing the radio.
Instructions on how to safely replace the unit's fuse, emphasizing the correct rating.
Procedure for entering the initial default password and understanding its function.
Steps to modify the anti-theft and rating protection passwords for enhanced security.
Explains the functions of the primary buttons located on the front panel of the AMM12N.
Details aspect ratio, image settings, and the critical parking brake requirement for video display.
Covers inserting, ejecting discs, and basic playback functions like stopping and pausing.
Details the iPod user interface, music playback controls, and navigation within iPod menus.
Instructions for pairing Bluetooth devices, reconnecting, managing incoming calls, and call transfer.
Solutions for general unit problems, remote control, audio, TFT display, and tuner reception issues.
Troubleshooting steps for CD/DVD playback problems and disc insertion errors.
Addresses common playback problems for various media types and error messages.
Detailed specifications for the DVD/CD player, FM/AM tuners, and TFT monitor.
General specifications including power supply, dimensions, operating temperature, and CEA power ratings.
Details warranty coverage, what is excluded, and limitations on liability.
Procedures for contacting the company, shipping instructions, and requirements for warranty service.
To Next Page
