21
RUNNING A SYSTEM RECOVERY FROM DVD/USB
If you are unable to use the main hard drive-based System Recovery
or you have replaced your existing hard drive, then you will need
to use the Recovery DVD’s/USB stick you created from the Recovery
Backup Wizard.
1. Insert the Recovery DVD or USB Stick that you created, into your
notebook and restart it.
2. Straight away start to slowly tap the f7 button.
3. After a few moments the Boot Options menu will appear.
4. Select the appropriate device to boot from, i.e. DVD drive or USB
stick.
5. After a few moments the System Recovery window will appear.
6. Choose the Reinstall Windows option by selecting the check
box and click the Next button.
NOTE
Once you have used the System Recovery Media, you will need to reinstall any
additional software and hardware that you may have added. Please refer to the
documentation supplied with those products for further help.
7. From this menu you will now be presented with a few options.
Choose the Start Full Destructive Recovery option to restore
your notebook and click the Next button.
8. On the final screen ensure the check box for Recover Using DVD
is selected and click on the Next button. This option also needs to
be selected if you are using the USB stick recovery method.
9. Once the process is complete, you will be asked to remove the
recovery media and restart your computer.
To Next Page
Loading...
Need help?
General
