advidia A-18 - Type II Camera Component Details

Network Bullet Camera·Quick Start Guide
11
11
Description
No.
Description
No.
Description
1
Mounting Base
6
Grounding Screw
2
Back Case
7
10/100M Self-adaptive
Ethernet Interface (PoE)
3
Front Case
8
Power Supply (DC 12V)
4
Lens
9
Memory Card Slot
5
Sun Shield
10
Reset Button
 This type of bullet camera supports PoE power supply. You can
power the camera by connecting both DC 12V interface and the
Ethernet interface. Or you can connect the Ethernet interface
only.
 Press and hold the reset button about 10s when the camera is
powering on or rebooting to restore the default settings, including
the user name, password, IP address, port No., etc.