Need help?Do you have a question about the advidia A-200 and is the answer not in the manual?
General| Lens Type | Fixed |
|---|---|
| Lens | 2.8mm |
| Connectivity | Ethernet |
| Power Supply | PoE (Power over Ethernet) |
| Sensor Type | CMOS |
| Minimum Illumination | 0.01 Lux |
| Video Compression | H.264 |
| Resolution | 2MP (1920 x 1080) |
| Night Vision | Yes, up to 65ft (20m) |
| IR Range | 65ft (20m) |
Statement regarding UL's testing limitations and product reliability assurances.
Details FCC compliance for digital devices and radio frequency energy.
Indicates compliance with European directives like Low Voltage and EMC.
Provides essential safety precautions to prevent injury or damage.
Lists the necessary hardware and software for accessing the unit.
Visual description of the speed dome unit.
Highlights key functionalities and specifications of the speed dome.
Details the various operational capabilities of the speed dome.
Guide to connecting and configuring the speed dome over a Local Area Network.
Instructions for physical connection and IP address configuration on LAN.
Guide to connecting the speed dome over a Wide Area Network.
Details on setting up WAN access using static or dynamic IP addresses.
Instructions on how to access and log into the speed dome using a web browser.
Describes initial power-up sequence and the main live view interface.
Steps to initiate and view the live video stream from the speed dome.
Instructions for manually recording video and capturing still images.
Details on how to control the pan, tilt, and zoom functions of the speed dome.
Overview of the interface used for controlling PTZ movements and lens functions.
Guide to defining, saving, and recalling specific camera positions.
Instructions for configuring and executing predefined patrol sequences.
Guide to recording and playing back custom movement sequences.
Settings for customizing stream type, image size, and view performance.
Setting the default or custom starting position for PTZ operations.
Adjusting fundamental PTZ settings like speed, freeze, and auto scan.
Defining the physical movement boundaries for the PTZ unit.
Setting up automated actions for the speed dome based on time schedules.
Defining automatic actions when the dome is inactive.
Setting up areas to mask or block from view in live or recorded footage.
Resetting PTZ settings like presets, patrols, and limits to default.
Setting local parameters for live view and web browser operations.
Adjusting time zone, synchronization, and daylight saving time.
Configuring automatic time synchronization using a Network Time Protocol server.
Setting the system time manually or synchronizing with local computer time.
Choosing the correct time zone for accurate time display.
Enabling and configuring automatic time adjustments for daylight saving.
General section for network configuration parameters.
Essential configuration for IP address, subnet mask, and gateway.
Setting up HTTP, RTSP, and HTTPS ports for network access.
Configuring Point-to-Point Protocol over Ethernet for modem connections.
Setting up Dynamic DNS for network access via a domain name.
Configuring Simple Network Management Protocol for status monitoring.
Enabling IEEE 802.1X for secure port-based network access control.
Quality of Service settings to manage network traffic priority.
Configuring File Transfer Protocol settings for uploading files.
Universal Plug and Play settings for automatic network configuration.
Setting stream type, resolution, bitrate, and encoding for video.
Configuring audio encoding parameters for the stream.
Adjusting image parameters like brightness, contrast, and sharpness.
Customizing On-Screen Display elements like time, date, and camera name.
Adding custom text overlays to the live video feed.
Setting up motion detection areas and sensitivity for alarm triggering.
Enabling detection and notification for video signal loss.
Setting up alarms for tampering with the camera lens or housing.
Configuring external input triggers for alarm events.
Defining actions for alarm outputs, including delay and schedule.
Configuring responses to system exceptions like HDD full or network disconnects.
Setting up email notifications for alarm events.
Configuring scheduled and event-triggered snapshots.
Adding and initializing Network Attached Storage for recording.
Setting up schedules for automatic video recording based on events or time.
Instructions for viewing recorded video files from storage.
Steps to download recorded video files to a local computer.
Creating, modifying, and deleting user accounts and permissions.
Configuring stream security and viewing device status details.
Procedures for restarting the device and resetting to factory defaults.
Importing and exporting device configuration settings.
Instructions for upgrading the device firmware.
Configuring RS-485 serial port parameters for PTZ control.
Introduction to the Advidia Camera Finder Utility for device search.
To Next Page
