Maintenance
1. Before moving or cleaning your Power Electric Treadmill unplug it from the main power
supply.
2. Always clean the Power Electric Treadmill with a damp cloth avoiding the control panel.
DO NOT USE ROUGH CLEANING AGENTS.
3. Clean the power switch and control panel with a soft dry cloth. DO NOT USE A WET
CLOTH IN THESE AREAS.
4. Do not use your treadmill in wet, damp conditions or high dust areas as this can cause
damage to the Power Electric Treadmill.
Adjusting the Running Belt
1. The running belt on the Confidence Power Electric Treadmill will shift slightly after continu-
ous use. This is normal for all treadmills.
2. To straighten/adjust the running belt turn the adjusting bolt on either side of the base, see
figure C and D.
3. Do not allow for the running belt to catch the sides of the Confidence Power Electric Tread-
mill as this will tear the belt.
To Next Page
Loading...
General