AEC MM1021 - Operation

7MM1021
OPERATION
OVERHEAD DOME LIGHTS
The Dome Lights integrated into the MM1021 are controlled by a three position slide
switch. Sliding the switch to the ON position will turn the lights ON. The OFF
position will prevent the lights from turning ON with the vehicle’s interior lighting,
and the auto position will allow the lights to turn ON and OFF with the vehicle’s
interior lighting. Do not leave the vehicle unattended with the dome light switch in
the ON position as this could result in a discharged battery.
Consult the Installation Manual for dome light wiring information.
POWER
MENU
ON OFF AUTO
Dome
Light
Switch
DOWN
UP