AEE sd20 - Page 31

-28-
13.Prompt of laser light
a.After starting up, long press “ Record” key for 3s in any
state, the system will lighten the laser light;
b.Long press “ Record” key for 3s when turning on laser
light, the system will turn off the laser light;
c.The laser light turning on/off also can be operated in
standby state;
d.The wireless remote control can execute laser light
turning on/off operation.
Note:
The function of long pressing “ Record” key for 3s to turn
on/off laser light does not interfere with the setting of
turning on “ Laser Synchronous Shooting” under the
camera parameter setting.
14.Turn On/Off TFT Display
a.In any status, long pressing Shutter key for 3 second to
turn on or off TFT display;
b.TFT display can’t be turned on or off by pressing Shutter
key on remote control;