EasyManuals Logo

AEG 10366MM-MN User Manual

AEG 10366MM-MN
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
If after some tries the burner
does not light, check if the
crown and its cap are in the
correct position.
If the burner accidentally
goes out, turn the knob to
the off position and try to
light the burner again after
minimum 1 minute.
5.2 Burner overview
WARNING!
Check that the heads
burners and the relative
burner caps are correctly
positioned in their housings.
A
B
D
C
A. Burner cap
B. Burner crown
C. Ignition candle
D. Thermocouple (if applicable)
5.3 Turning the burner off
To put the flame out, turn the knob to
the off position .
WARNING!
Always turn the flame down
or switch it off before you
remove the pans from the
burner.
6. HOB - HINTS AND TIPS
WARNING!
Refer to Safety chapters.
6.1 Cookware
WARNING!
Do not put the same pan on
two burners.
WARNING!
Do not put unstable or
damaged pots on the burner
to prevent from spill and
injury.
CAUTION!
Make sure that pot handles
are not above the front edge
of the cooktop.
CAUTION!
Make sure that the pots are
placed centrally on the
burner in order to get
maximum stability and to
get lower gas consumption.
ENGLISH 11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AEG 10366MM-MN and is the answer not in the manual?

AEG 10366MM-MN Specifications

General IconGeneral
BrandAEG
Model10366MM-MN
CategoryKitchen Appliances
LanguageEnglish

Related product manuals