Sports shoes cannot be dried without the rack, they can damage the drum due to their
weight.
For first unpacking of the rack please refer to the installation chapter.
WARNING!
Before installing the rack check the dryer drum. It must be empty!
1. Open the loading door.
2. Insert the rack.
Lift the rack horizontally in the drum.
Guide the rack down until the support
bracket at the front rests on the opening.
3. Place the washing on the rack:
– Spread the garment out in the rack and
roll it up, without squashing or folding
it.
– Place sport shoes on the rack with the
handle turned up as a support.
Take out the insoles and place them beside the
shoes on the rack. Tie the shoelaces.
26
Drying rack
To Next Page
Loading...
