4. Push down unlock button on large mesh
filter.
Large mesh filter jumps up.
5. Take out fine strainer.
6. Remove fluff from fine strainer. It is best
to use a damp hand for this purpose.
Clean the entire filter area
The strainer area does not have to be
cleaned after every drying cycle, but
should be checked regularly and cleaned
of fluff if necessary.
7. To do this, grip the top of the large mesh
filter and pull it forwards until it comes
loose from the two brackets.
8. Remove fluff from the entire filter area.
It is best to use a vacuum cleaner for this
purpose.
9. Press both journals of the large mesh
filter into the brackets on the loading
door until they snap into place.
10. Re-insert fine strainer.
11. Press against the large mesh filter until
it locks into the interlock.
28
Care and cleaning
To Next Page
Loading...
