Why can't I set the temperature on my AEG ADT2304?
If you cannot set the temperature on your AEG Freezer, it might be because the Super Freeze function is switched on. Turn off the Super Freeze function manually, or wait for it to deactivate automatically, to set the temperature.
What to do if there is too much frost and ice in my AEG ADT2304?
Excessive frost and ice in your AEG Freezer can be due to several factors. Ensure the door is closed correctly. Also, make sure food products are properly wrapped. Check if the temperature is set correctly. If the appliance is fully loaded and set to the lowest temperature, set a higher temperature. Addressing these issues should help reduce frost and ice buildup.
Why is there water flowing on the rear plate of my AEG refrigerator?
Water on the rear plate of your AEG refrigerator is likely due to condensed water during the automatic defrosting process. Other potential causes include the door being opened too frequently or not closed completely, and food not being properly wrapped. Try to open the door only when necessary, ensure it's fully closed, and wrap food in suitable packaging.
What to do if water flows inside my AEG refrigerator?
If water is flowing inside your AEG refrigerator, it could be that food products are blocking the water from flowing into the water collector. Ensure that food products do not touch the rear plate. Another possible cause is a clogged water outlet, so try cleaning the water outlet.
Why is the temperature in my AEG ADT2304 too low or too high?
If the temperature in your AEG Freezer is not ideal, the temperature might not be set correctly. Set a higher or lower temperature as needed. Also, ensure that the door is closed correctly.
What to do if my AEG Freezer does not operate?
If your AEG Freezer isn't working, first, ensure the appliance is switched on. Next, check that the mains plug is correctly connected to the mains socket. Finally, verify that there is voltage in the mains socket by connecting a different electrical appliance. If there's still no power, contact a qualified electrician.
Why is my AEG ADT2304 Freezer compressor always running?
The compressor in your AEG Freezer might be running constantly for several reasons. It's normal if it's just after pressing "Super Freeze" or changing the temperature. Other causes include a misaligned door, incorrect temperature settings, placing too much food at once, high room temperature, food placed in the freezer being too warm, the door not being closed correctly, the Super Freeze function being on, or the appliance not being level. Try waiting a few hours after adding a lot of food, ensure food cools before storing, and make sure the door closes properly.
What to do if my AEG ADT2304 Freezer is too noisy?
If your AEG Freezer is making excessive noise, check if the appliance stands stable.
Why does my AEG ADT2304 door not open easily?
If you're having trouble opening your AEG Freezer door, especially right after closing it, wait a few seconds before trying to reopen it.
What to do if water flows on the floor from my AEG Freezer?
If water is leaking onto the floor from your AEG Freezer, the melting water outlet may not be connected to the evaporative tray above the compressor. Attach the melting water outlet to the evaporative tray.
General| Category | Freezer |
|---|---|
| Energy Efficiency Class | A+ |
| Freezing Capacity | 20 kg/24h |
| Noise Level | 42 dB |
| Defrosting System | Manual |
| Climate Class | SN-T |
| Total Capacity | 230 liters |
To Next Page
