EN - 11 -
• Install the two plastic distance guides (the parts on the black vanes
-condenser- at the rear) by turning it 90° (as shown in the gure) to
prevent the condenser from touching the wall.
• If you position the appliance against a wall in a freestanding installation,
install the rear spacers in order to guarantee the maximum possible
distance
Before using your freezer
• When using your freezer for the rst time, or after transportation, keep it in
an upright position for at least 3 hours before plugging into the mains. This
allows ecient operation and prevents damage to the compressor.
• Your freezer may have a smell when it is operated for the rst time. This is
normal and the smell will fade away when your freezer starts to cool.
• “For Side by Side niche installation please refer to the Joining Kit provided with the
cabinet freezer and its installation manual (NOTE: joining kit is also available separately
as accessory).”
Internal lighting
WARNING!
Risk of electric shock.
• Concerning the lamp(s) inside this product and spare part lamps sold separately: These
lamps are intended to withstand extreme physical conditions in household appliances,
such as temperature, vibration, humidity, or are intended to signal information about
the operational status of the appliance. They are not intended to be used in other
applications and are not suitable for household room illumination.
To Next Page
Loading...
