4. Check that no cut, or stray strands of
wire is present and the cord clamp
(E) is secure over the outer sheath.
Make sure the electricity supply
voltage is the same as that indicated
on the appliance rating plate.
5. Switch on the appliance.
The appliance is supplied with a 13 amp
fuse (B). In the event of having to
change the fuse in the plug supplied, a
13 amp ASTA approved (BS 1362) fuse
must be used.
WARNING!
A cut off plug inserted into a
13 amp socket is a serious
safety (shock) hazard.
Ensure that it is disposed of
safely.
3.4 Levelling
When placing the appliance make sure
that it stands level. This can be achieved
by two adjustable feet at the bottom in
front.
3.5 Door reversibility
Please refer to the separate document
with instructions on installation and door
reversal.
CAUTION!
At every stage of reversing
the door protect the floor
from scratching with a
durable material.
4. OPERATION
4.1 Control panel
1
ON/OFF Power Indicator Light
2
ON/OFF Button
3
Temperature Warmer Button
4
Display
5
Temperature Colder Button
6
Alarm Indicator Light
7
Alarm Stop Button
8
Frostmatic Indicator Light
9
Frostmatic Button
4.2 Switching on
Leave the appliance to stand upright for
4 hours after installation.
1. Insert the plug into the wall socket
2. Press the ON/OFF Button.
The ON/OFF Power Indicator Light
will light up. The appliance is
switched on.
ENGLISH 9
To Next Page
Loading...
Need help?
General
