When the cleaning ends:
Turn off the oven and wait
until it is cold.
Clean the cavity with a soft
cloth.
Remove the residue from the
bottom of the cavity.
11.4 Cleaning Reminder
When the reminder appears, cleaning is necessary.
Use the function: Pyrolytic Cleaning.
11.5 How to use: Descaling
Before you start:
Turn off the oven and wait
until it is cold.
Remove all accessories. Make sure that the water drawer
is empty.
Duration of the first part: around 100 min
Step 1 Place the deep pan on the first shelf position.
Step 2 Pour 250 ml of the descaling agent in the water drawer.
Step 3 Fill the remaining part of the water drawer with water to the maximum level until the
signal sounds or the display shows the message.
Step 4 Select: Menu / Cleaning.
Step 5 Turn on the function and follow the instruction on the display.
The first part of descaling starts.
Step 6 After the first part is over, empty the deep pan and put it back on the first shelf posi‐
tion.
Duration of the second part: around 35 min
Step 7 Fill the remaining part of the water drawer with water to the maximum level until the
signal sounds or the display shows the message.
Step 8 When the function ends, remove the deep pan.
41/60
CARE AND CLEANING
To Next Page
Loading...
