AEG D 5000 - Page 23

23
9. Press the arrow key l (11) or k (3) until VOLUME is displayed.
10. Press the menu key B (4). The set ring volume is displayed.
11. Press a numerical key from 0 to 9 to select the wanted volume.
12. Press the menu key B (4) to confirm the selected volume.
Setting the Ring Melody of the Base
1. The handset is in standby (no tone).
2. Press the menu key B (4).
3. Press the arrow key l (11) or k (3) until RING SEL is displayed.
4. Press the menu key B (4).
5. EXTERNAL is displayed.
6. Press the arrow key l (11) or k (3) until BASE STAT is displayed.
7. Press the menu key B (4).
8. MELODIES is displayed.
9. Press the menu key B (4).
10. The number of the set ring melody is displayed.
11. Press a numerical key from 1 to 9 to select the wanted melody.
12. Press the menu key B (4) to confirm the selected melody.
Pause Key
If you want to insert a pause while you are dialing a number, just press the
pause/redial key P tt (6). A pause takes up the place of a digit in the memory
(readialing or phone book).