AEG DD 8765 - Technical Specifications; Mounting accessories included

67
Technical Specifications
DD 8794 - DD 8795 - HD 8795
Dimensions (in cm):
Height x Width x Depth 80 x 89,8 x 33,5
Maximum absorbed power: 235 W
Motor absorption: 175 W
Lighting*: 3 x 20W (30° Ø35 12V GU4)
Length of the cable: 150cm
Electrical connection: 240 V (DD 8794 - 230 V)
Fuse rating: 13A 250V
* Attention! To guarantee the same quality of illumination we advise using the same
type of light: Halogen Lamp PHILIPS STANDARD LINE Code 425409, 20W 30° Ø35 12V
GU4
DD 8765
Dimensions (in cm):
Height x Width x Depth 80 x 59,8 x 33
Maximum absorbed power: 250 W
Motor absorption: 175 W
Light absorption: upper light 1 x 36W (PL)
side lights** 2 x 13W (Neon Ø16mm - G5)
Length of the cable: 150 cm
Electrical connection: 230 V
Fuse rating: 13A 250V
** Attention! To guarantee the same quality of illumination we advise using the same
type of light: 13W Phillips neon lamp (Cod. Ref. 8711500644305).
Ensure that the transparent part of the bulb is directed towards the outside to
guarantee a correct diffusion of the light.
Mounting accessories included
1 support bracket
1 deflector
3 Rubber strips
2 Screw caps
1 template
2 spacers
4 wood-screws 5 x 45 mm
4 wall plugs Ø 8 mm
2 metal screws 3,5 x 9,5
2 metal screws 3,5 x 32
2 metal screws 5 x 18
1 reduction flange Ø 150-125 mm (DD 8794 and DD 8795 only)
2 flanges Ø 150 mm
Only DD 8795 and HD 8795: 2 Stainless Steel side panels