AEG DVK6980HB - AEG Cooker Hood Controls Overview; Control Panel Button Functions

6
www.aeg.com
4. CONTROLS
ABCD EF GH
IL
Button
Function Display
A
Brief pressure: Activates/Deactivates the button pad functions.
All the buttons light up white.
If the motor is ON, it turns the motor off and leaves the button
pad functions active.
If the motor is OFF, the button pad remains active for 1 minute.
-
Pressed for 3 Seconds: Activates/Deactivates the button
pad lock. For example to allow cleaning of the Glass without
activating any functions.
Active: All the buttons ash.
Inactive: Buttons remain lit for 1 minute.
B
Activates speed one. The button turns from white to red.
C
Activates speed two. The button turns from white to red.
D
Activates speed three. The button turns from white to red.
E
Activates Intensive 1 speed for 10 minutes. At the end of this
time the system will automatically return to the speed set
before. It is disabled by changing speed or pressing button A.
The button turns from white to red.
Press and hold for approximately 3 seconds to Enable /
Disable the Activated Charcoal Filter alarm.
H ashes 5 times.
F
Activates Intensive 2 speed for 5 minutes. At the end of this
time the system will automatically return to the speed set
before. It is disabled by changing speed or pressing button A.
The button turns from white to red.
G
Activates BREEZE speed for 60 minutes. At the end of this
time the motor switches off. It is disabled by changing speed
or pressing button A.
The button turns from white to red.
H
Filter alarm button.
This button is normal off. It is only displayed when the lter
alarm is triggered. The alarm can be reset by pressing and
holding this button for approximately 3 seconds.
Button H xed: indicates the need to
wash the metal grease lters. The alarm
is triggered after the Hood has been in
operation for 40 working hours.
Button H ashing: indicates the need
to change the activated charcoal lters,
and also to wash the metal grease lters.
The alarm is triggered after the Hood has
been in operation for 160 working hours.
I
H2H indicator button.
This button is normally off. It is only displayed when the hob
is connected to the Hood.
The button turns red.
L
Press briey: Turns the lighting system on and off at ma-
ximum intensity.
-
Press and hold to change the lighting intensity up or down. -