Why AEG FAVORIT ACTIVE AA Dishwasher programme does not start?
The dishwasher program may not start because the door isn't properly closed, the mains plug isn't plugged in, the house fuse is faulty, or the delay start timer is selected. To resolve this, ensure the door is shut, the mains plug is inserted, the fuse is replaced if faulty. If the delay start is active, cancel it to start the wash immediately.
What to do if top light is flashing on my AEG FAVORIT ACTIVE AA and no water is entering?
If the top light is flashing and no water is entering the AEG dishwasher, it could be due to several reasons. The tap might be blocked or furred with lime-scale, so you should clean it. Also, the filter in the threaded hose fitting could be blocked, so clean that as well. Finally, the water inlet hose might not be correctly laid, so check its installation.
What to do if middle light is flashing on my AEG FAVORIT ACTIVE AA Dishwasher?
If the middle light is flashing on your AEG dishwasher's multi-display, it indicates that either the sink outlet is blocked, or the water drain hose is not correctly laid. You should clean the sink outlet and check the hose installation.
What causes rust spots in my AEG FAVORIT ACTIVE AA Dishwasher?
Rust spots in the washing compartment of your AEG dishwasher are typically due to external particles like rust from water pipes, pans, or cutlery. Remove these spots with a stainless steel cleaner. Ensure you only wash dishwasher-safe items and securely close the salt dispenser lid.
What to do if top and middle light are flashing on my AEG FAVORIT ACTIVE AA?
If the top and middle lights are flashing on your AEG dishwasher, the anti-flood system has been triggered. Close the tap and contact your local AEG Service Force Centre.
General| Brand | AEG |
|---|---|
| Model | FAVORIT ACTIVE AA |
| Category | Dishwasher |
| Language | English |
General safety precautions and warnings for operating the dishwasher.
Essential safety measures to protect children from hazards associated with the appliance.
Guide on setting the water softener based on local water hardness levels.
Step-by-step instructions for filling the salt container correctly.
Specific instructions for loading various types of cutlery into the rack.
Instructions on using the detergent dispenser and its dosing levels.
Guide for choosing the most suitable programme based on dish type and soiling.
Step-by-step instructions for starting a wash programme.
Detailed steps for checking and cleaning the dishwasher's filter system.
Interpreting and resolving flashing lights indicating faults.
Solutions for issues like the programme not starting or rust spots.
Addressing common problems like dirty dishes or wet results.
Instructions for water supply, drain, and electrical connections.
Explanation of the AQUA CONTROL SYSTEM for leak protection.
Safe electrical hookup and fuse replacement procedures.
To Next Page
