11.3 Cleaning the upper
spray arms
We recommend to clean the upper spray
arms regularly to prevent soil from
clogging the holes. Clogged holes can
cause unsatisfactory washing results.
The upper spray arms are placed under
the upper basket. The spray arms (B) are
installed in the duct (A) with the
mounting elements (C).
1. Pull out the upper basket.
2. To detach the spray arm, turn the
mounting element clockwise.
3. Wash the spray arm under running
water. Use a thin pointed tool, e.g. a
toothpick, to remove particles of soil
from the holes.
4. To install the spray arm back, insert
the mounting element in the spray
arm and fix it in the duct by turning it
counterclockwise. Make sure that the
mounting element locks into place.
11.4 Internal cleaning
• Carefully clean the appliance,
including the rubber gasket of the
door, with a soft damp cloth.
• To maintain the performance of your
appliance, use a cleaning product
designed specifically for dishwashers
at least once every two months.
Carefully follow the instructions on the
packaging of the product.
• Use the programme for optimal
cleaning results.
• Do not use abrasive products,
abrasive cleaning pads, sharp tools,
strong chemicals, scourer or solvents.
• Using short-duration programmes
regularly can cause grease and
limescale buildup inside the
appliance. Run long-duration
programmes at least twice a month to
prevent the buildup.
www.aeg.com20
To Next Page
