This document is a user manual for the AEG FSB53607Z dishwasher.
Function Description
The AEG FSB53607Z is a household-type dishwasher designed for cleaning dishes and tableware. It features a "Beam-on-Floor" light that projects onto the floor below the appliance door, indicating the program status (red for running, green for completed, flashing red for malfunction). The appliance includes an "ECOMETER" that shows the impact of program selection on energy and water consumption, with more bars indicating lower consumption. The "ECO" program is highlighted as the most environmentally friendly option for normally soiled loads. The "AirDry" function automatically opens the door during the drying phase to improve drying results. The appliance also has an "Auto Off" function to save energy by switching off when not operating.
Important Technical Specifications
- Dimensions: Width / height / depth (mm): 596 / 818-898 / 550
- Electrical Connection: Voltage (V): 220 - 240, Frequency (Hz): 50
- Water Supply Pressure: Min. / max. bar (MPa): 0.5 (0.05) / 10 (1.0)
- Water Supply Temperature: Cold water or hot water, max 60 °C
- Capacity: 13 place settings
- Water Hardness Settings: Adjustable from 1L to 10L (default: 5L)
- Consumption Values (ECO program): Water: 9.9 L, Energy: 0.835 kWh, Duration: 240 min
Usage Features
The dishwasher offers a "MY TIME" program selection bar, allowing users to choose cycles based on duration and soil level:
- Quick (30min): For fresh and light soil.
- 1h: For fresh and lightly dried-on soil.
- 1h 30min: For normally soiled items with drying.
- 2h 40min: For heavily soiled items with drying.
- ECO: Longest program for efficient energy and water use with normal soil.
An "AUTO Sense" program automatically adjusts the cycle based on the load's soil degree and dish quantity, modifying temperature, water quantity, and wash duration.
"EXTRAS" options can be activated to customize programs:
- ExtraPower: Improves dishwashing results by increasing wash temperature and duration.
- GlassCare: Prevents damage to delicate items by reducing rapid temperature changes and setting the wash temperature to 45 °C.
Basic settings can be configured, including:
- Water hardness: To optimize the water softener.
- Rinse aid empty notification: To activate or deactivate the rinse aid indicator.
- End sound: To activate or deactivate the acoustic signal at the end of a program.
- Auto door open (AirDry): To activate or deactivate the automatic door opening.
- Key tones: To activate or deactivate button sounds.
- Latest program selection: To enable or disable automatic selection of the most recently used program and options.
The appliance allows for delayed start of programs (1 to 24 hours).
Maintenance Features
The manual provides detailed instructions for care and cleaning:
- Machine Care Program: A dedicated program (70 °C cleaning) for internal cleaning, removing limescale and grease buildup. An indicator light signals when this program is needed.
- Filter Cleaning: The filter system, consisting of three parts, should be checked and cleaned regularly. Instructions are provided for disassembling, washing, and reassembling the filters.
- Spray Arm Cleaning: Recommendations are given to regularly clean the lower spray arm to prevent clogging. The upper spray arm should also be checked for clogged openings.
- External Cleaning: The appliance exterior should be cleaned with a moist soft cloth and neutral detergents. Abrasive products, cleaning pads, or solvents should not be used.
- Internal Cleaning: The appliance interior should be cleaned with a soft damp cloth. A cleaning product designed for dishwashers is recommended every two months to maintain performance.
The manual also includes troubleshooting information for common issues and alarm codes, advising users on possible causes and solutions before contacting an Authorized Service Centre.
Need help?
General
To Next Page
