EasyManuals Logo

AEG FSK93600P User Manual

AEG FSK93600P
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
9. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate
the appliance.
Fill the salt container if the display
shows the related message.
Fill the rinse aid dispenser if the
display shows the related
message.
3. Load the baskets.
4. Add the detergent.
5. Set and start a programme suitable
for the type of load and the degree
of soil.
9.1 Using the detergent
A
B
C
CAUTION!
Only use detergent
specifically designed for
dishwashers.
1. Press the release button (A) to open
the lid (C).
2. Put the detergent, in powder or
tablets, in the compartment (B).
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid
locks into position.
9.2 Setting and starting a
programme
How to start a programme
1. Press the on/off button to activate
the appliance.
The display shows the programme list.
2. Select a programme. ECO 50° is
always the default programme.
3. Set applicable options if desired.
Once you set options, return to the
programme list.
4. Press .
If the programme is applicable to the
TimeSaver option, the display shows two
values with corresponding programme
durations.
Fast: select the value to activate
TimeSaver and press to
confirm.
Normal: select the value to
deactivate TimeSaver and press
to confirm.
5. Close the appliance door to start the
programme.
How to start the MyFavourite
programme
1. Press and hold for about 3
seconds until the display shows the
MyFavourite programme.
2. Close the appliance door to start the
programme.
How to delay the start of a
programme
It is not possible to set the delay start of
the MyFavourite programme.
1. Select a programme.
2. Press .
The display shows the option list.
3. Select Delay and press
.
The display shows the number of hours
available for the delay start (from 1 to 24).
4. Select the desired number of hours
and press to confirm.
The display returns to the option list.
5. You can set other applicable options.
6. Press
repeatedly until the display
shows the selected programme.
7. Press to confirm the
programme selection.
www.aeg.com
16

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AEG FSK93600P and is the answer not in the manual?

AEG FSK93600P Specifications

General IconGeneral
BrandAEG
ModelFSK93600P
CategoryDishwasher
LanguageEnglish

Related product manuals