Why does the gas ring burn unevenly on my AEG HG654320NM Hob?
If the gas ring on your AEG Hob burns unevenly, it's likely that the burner crown is blocked with food residues. Ensure that the injector is not blocked and the burner crown is clear of any food particles.
What to do if there is no spark when lighting the gas supply on my AEG HG654320NM?
If there is no spark when lighting the gas supply on your AEG Hob, it could be due to a couple of reasons. First, check that there is an electrical supply to the hob. Second, ensure that the burner cap and crown are placed evenly.
Why does the flame blow out immediately after ignition on my AEG Hob?
If the flame blows out immediately after ignition on your AEG Hob, it might be that the thermocouple is not heated sufficiently.
General| Type | Gas Hob |
|---|---|
| Model Number | HG654320NM |
| Number of Burners | 4 |
| Control Type | Knobs |
| Surface Material | Stainless Steel |
| Installation Type | Built-In |
| Ignition Type | Automatic |
| Safety Features | Flame Failure Device |
| Energy Efficiency Class | A |
Introduction to the AEG product and where to find accessories.
Covers general safety, child safety, and proper usage guidelines for the appliance.
Crucial safety regulations for hob installation, including ventilation and location.
Details on gas connection, safety, and specific requirements for installation.
Covers gas injector replacement and minimum flame level adjustment for burners.
Guidance on replacing the connection cable and integrating the hob into kitchen units.
Diagram and labels identifying hob components like burners and controls.
Explanation of symbols on control knobs and their functions.
Step-by-step guide for lighting the gas burners, including safety warnings.
Advice on efficient energy use, pot usage, and acrylamide formation.
Safety warnings for cleaning, avoiding steam, abrasives, and acids.
Steps for cleaning parts, removing dirt, and polishing surfaces.
Guidance on spark plug cleaning and recommended periodic checks.
Identifies common issues like no spark or uneven flame and their solutions.
Instructions on where to stick adhesive labels for warranty and reference.
Details hob dimensions, recess sizes, and burner heat input.
Lists total power, electric supply, gas connection, and category.
Provides data on by-pass diameters and gas burner power consumption.
Information on proper disposal and recycling of the product.
To Next Page
