AEG IAE84881FB - Before First Use

Lock - this function temporarily
disables the control panel during
cooking.
Child Lock - this function disables the
control panel while the hob does not
operate, preventing accidental use.
Stopwatch, Count Down Timer, and
Minute Minder - are three functions that
you can choose between to monitor the
cooking time.
For more info, refer to "Daily use".
4.5 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
III / II / I There is a risk of
burns from residual heat.
The indicator shows the level
of the residual heat.
The induction cooking zones produce
the heat necessary for the cooking
process directly in the bottom of the
cookware. The glass ceramic is heated by
the heat of the cookware.
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1 Using the display
• Only the backlit symbols can be used.
• To activate a given option, touch the
relevant symbol on the display.
• The selected function is activated
when you remove the finger from the
display.
• To scroll the available options, use a
quick gesture or drag your finger
across the display. The speed of the
gesture determines how fast the
screen moves.
• The scrolling can stop by itself or you
can stop it immediately if you touch
the display.
• You can change most of the
parameters shown on the display
when you touch the relevant symbols.
• To select the required function or
time you can scroll through the list
and / or touch the option you want to
choose.
• When the hob is activated and some
of the symbols disappear from the
display, touch it again. All the symbols
come back on.
• For certain functions, when you start
them, a pop-up window with
additional information appears. To
deactivate the pop-up window
permanently, check
before you
activate the function.
• Select a zone first to activate the timer
functions.
Symbols useful for display navigation
To confirm the selection or setting.
To go back / forwards one level in
the Menu.
To scroll up / down the instructions
on the display.
To activate / deactivate the op-
tions.
To close the pop-up window.
To cancel a setting.
5.2 First connection to the
mains
When you connect the hob to the mains
you have to set Language, Display
Brightness and Buzzer Volume.
You can change the setting in Menu >
Settings > Setup. Refer to "Daily use".
5.3 Food Sensor calibration
Before you start using the Food Sensor
you need to calibrate it, to ensure that
the temperature readings are correct.
Once the Food Sensor is calibrated
properly, it measures the temperature at
ENGLISH
11