AEG IKE74441IB - User Manual

Need help?

Do you have a question about the AEG IKE74441IB and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

This document is a user manual for the AEG IKE74441IB induction hob.

Function Description

The AEG IKE74441IB is a built-in induction hob designed for household use. It features four induction cooking zones and a control panel for operation. The hob utilizes an electromagnetic field to generate heat directly in the cookware, making it energy-efficient. It includes several functions to enhance cooking and safety.

Key Functions:

ON/OFF: Activates and deactivates the hob.
Heat Setting: Allows users to set and change the heat level for each cooking zone using a control bar. Heat settings range from 0 (deactivated) to 14.
PowerBoost (P): Provides maximum power to an induction cooking zone for a limited time, accelerating heating. After this period, the zone automatically reverts to the highest heat setting.
Timer:
- Count Down Timer: Sets a specific cooking duration (00-99 minutes) for a single cooking zone. An acoustic signal sounds when the time ends, and the zone deactivates.
- CountUp Timer: Monitors how long a cooking zone has been operating.
- Minute Minder: A standalone timer function that operates independently of the cooking zones, useful for general timing.
Pause (||): Sets all active cooking zones to the lowest heat setting, allowing for a temporary interruption in cooking.
Bridge: Connects two left-side cooking zones to operate as one, suitable for larger cookware. The function activates when cookware covers the centers of both zones.
Automatic Heat Up (A): Activates a cooking zone at its highest setting initially, then automatically adjusts to the desired heat setting for faster heating. This function requires the cooking zone to be cold to activate.
Lock (L): Locks the control panel to prevent accidental changes to heat settings while cooking zones are active. The timer functions remain operational.
Child Safety Device: Prevents accidental operation of the hob. It can be activated and deactivated through a specific sequence of touches on the control panel. There is also an option to override it for a single cooking time.
OffSound Control: Allows users to deactivate or activate the hob's acoustic signals.
Power Management: Automatically divides available power among active cooking zones if the consumed power exceeds the supply limitation, protecting the house installation's fuses. The last selected cooking zone is prioritized, and remaining power is distributed to other zones in reverse order of selection.
Hob²Hood (H): An advanced automatic function that connects the hob to a special AEG hood via an infrared signal. The fan speed is automatically adjusted based on the hob's mode setting and the temperature of the hottest cookware. The fan can also be operated manually from the hob. This function offers different automatic modes (H0-H6) that control fan speed and light activation based on boiling or frying processes.

Important Technical Specifications

Model Identification: IKE74441IB
Type of Hob: Built-In Hob
Number of Cooking Zones: 4
Heating Technology: Induction
Nominal Power (Maximum Heat Setting):
- Left front: 2300 W
- Left rear: 2300 W
- Middle front: 1400 W
- Right rear: 2300 W
PowerBoost:
- Left front: 3200 W (10 min duration)
- Left rear: 3200 W (10 min duration)
- Middle front: 2500 W (4 min duration)
- Right rear: 3600 W (10 min duration)
Cookware Diameter:
- Left front: 125-210 mm
- Left rear: 125-210 mm
- Middle front: 125-145 mm
- Right rear: 205-240 mm
Diameter of Circular Cooking Zones (Ø):
- Left front: 21.0 cm
- Left rear: 21.0 cm
- Middle front: 14.5 cm
- Right rear: 24.0 cm
Energy Consumption per Cooking Zone (EC electric cooking):
- Left front: 179.6 Wh/kg
- Left rear: 177.0 Wh/kg
- Middle front: 180.2 Wh/kg
- Right rear: 174.6 Wh/kg
Energy Consumption of the Hob (EC electric hob): 177.9 Wh/kg
Electrical Connection: 220-240 V / 400 V 2N 50-60 Hz, 7.35 kW. Requires connection by a qualified electrician and proper earthing.
Cooling Fans: The appliance has cooling fans on the bottom.

Usage Features

Sensor Field Operation: The hob is operated using touch-sensitive sensor fields. Displays, indicators, and sounds provide feedback on function status.
Automatic Switch Off: The hob automatically deactivates under certain conditions, such as no heat setting after activation, spills on the control panel, overheating, incorrect cookware, or prolonged inactivity.
OptiHeat Control (3-step Residual Heat Indicator): Indicators (H, h, or ) show the level of residual heat in cooking zones, signaling whether it's hot enough to continue cooking, keep warm, or if there's only residual heat. This helps prevent burns and promotes energy saving.
Cookware Compatibility: Suitable for cast iron, steel, enamelled steel, stainless steel, and multi-layer bottom cookware with a correct manufacturer marking. Cookware should have a thick, flat, clean, and dry bottom. Induction zones automatically adapt to cookware dimensions.
Noise During Operation: Normal operational noises include crackling (different materials), whistling (high power, different materials), humming (high power), clicking (electric switching), and hissing/buzzing (fan operation). These are normal and do not indicate a malfunction.
Öko Timer (Eco Timer): To save energy, the heater deactivates before the countdown timer finishes, with the duration depending on the heat setting and cooking time.
Energy Saving Hints: Recommendations include using only necessary water, always using lids, placing cookware on the zone before activation, using smaller cookware on smaller zones, centering cookware, and utilizing residual heat.

Maintenance Features

Regular Cleaning: Clean the hob after each use to prevent surface deterioration.
Cleaning Agents: Use a moist soft cloth and neutral detergents. Avoid abrasive products, cleaning pads, solvents, or metal objects.
Immediate Cleaning: Immediately remove melted plastic, plastic foil, sugar, and sugary foods using a special hob scraper at an acute angle to prevent damage.
Cool-Down Cleaning: Once sufficiently cool, remove limescale rings, water rings, fat stains, and shiny metallic discoloration with a moist cloth and non-abrasive detergent.
Shiny Metallic Discoloration: Can be removed with a solution of water and vinegar.
Safety Precautions: Always switch off the appliance and let it cool down before cleaning. Do not use water spray or steam.
Troubleshooting: The manual provides a guide for common issues and their remedies, such as the hob not activating, sensor field problems, and error codes. For persistent issues, contact an Authorised Service Centre.
Spare Parts: Always use original spare parts for repairs.
Disposal: Dispose of packaging in relevant containers. Recycle waste electrical and electronic appliances at local facilities.