7. CLEANING AND MAINTENANCE
7.1. Cleaning is the only
maintenance action that is
required normally.
Warning! Cleaning must be done with
the crockery warmer disconnected
from the electrical power supply.
Remove the plug from the power
socket or disconnect the crockery
warmer power supply circuit.
Do not use aggressive or abrasive
cleaning products, abrasive sponges
or pointed objects since stains or
abrasion marks may appear.
Do not use high pressure or steam jet
cleaning appliances.
Appliance front and control
panel
The crockery warmer can be cleaned
using just a damp cloth. If it is very
dirty, add a few drops of washing-up
liquid to the washing water.
Wipe the surfaces dry using a dry
cloth.
For stainless steel fronted crockery
warmers, special products for
treatment of stainless steel surfaces
can be used. These products prevent
the surfaces becoming dirty again for
some time. Apply a thin layer of such a
product on the surface using a soft
cloth
On aluminium fronted crockery
warmers use a gentle glass cleaning
product and a soft cloth that does not
release fluff. Wipe horizontally without
pressing on the surface since
aluminium is sensitive to scratches
and cuts.
Interior of the crockery warmer
Clean the inside of the crockery
warmer regularly using a damp cloth. If
it is very dirty add a few drops of