18
All other parts should be cleaned under running
water!
Remove and allow to thoroughly dry before re-
inserting in order to clean the sealing rings
(Figures 3 D and 4 B).
Food which contains a lot of dyes (e.g. carrots)
may discolor plastic parts. Any discoloration may
be removed by means of cooking oils. Use a brush
to clean them if necessary before rinsing. Do not
use any sharp instruments for cleaning purposes.
Special care should be taken with the sharp
blades, metal plates and mixer blades.
Allow all of the parts to thoroughly dry.
For the Sake of the Environment
Do not simply throw away packaging materials.
■ The packaging carton may be brought to a
paper recycling facility or the responsible dis-
posal site.
■ The plastic sacks made of polyethylene (PE)
may be brought to polyethylene collection
points for recycling.
Polyester parts made from foamed polystyrene
(PS) are free of CFC.
Please contact your municipal authority for
information about your local responsible recyc-
ling facility.
Customer Service
Our products represent the highest available
quality.
Only with your support are we able to develop
equipment which satisfies your requirements.
Please contact us should you, nevertheless, have
any problems in operating this equipment.
To Next Page
Loading...
Need help?
General
