6. DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Setting function: Microwave
How to start cooking with the default settings:
Step 1 Turn the knob for the heating functions.
First, the display shows the default setting for microwave power and then the default
setting for: Duration.
Step 2
To start with the default settings press: .
The signal sounds and the oven stops when cooking time ends.
Step 3 Turn the knob for the heating functions to the off position.
How to change the settings:
Step 1 Turn the knob for the heating functions.
First, the display shows the default setting for microwave power and then the default
setting for: Duration.
Step 2 Turn the control knob to change the microwave power. The power setting changes in
100 W steps.
Step 3
- press and then turn the control knob to change: Duration. - press again and
again to switch between the settings for: Duration, microwave power. Turn the control
knob to set the value. To confirm press: .
Step 4
Press: .
The signal sounds and the oven stops when cooking time ends.
Step 5 Turn the knob for the heating functions to the off position.
When you open the oven door, the oven stops. To start it again, close the door and press:
.
The maximum time of microwave functions depends on microwave power you set:
MICROWAVE POWER MAXIMUM TIME
100 - 600 W 90 minutes
More than 600 W 7 minutes
15/40