Step 4 Turn the control knob to set the hour for the function: Duration.
Press: .
The display shows: .
Step 5 Turn the control knob to set the hour for the function: End Time.
Press: .
Step 6 Turn the control knob to set the minutes for the function: End Time.
Press: .
The display shows: , .
Oven turns on automatically later on, works for the set Duration time and stops at the set End
Time.
At the set End Time the signal sounds for 2 min. The time setting flash in the display. The oven
turns off.
Step 7 Press any button to stop the signal.
Step 8 Turn the knobs to the off position.
You can change the heating function after you set the function: Time Delay.Turn the knobs to the
off positions to stop the function: Time Delay.
This function is available only for: Grill
7.6 How to set function: Minute Minder
Minute minder can be both set when the oven is turned on and off.
Step 1
- press repeatedly. , 00 - flash.
Step 2 Turn the control knob to set the seconds and than the minutes.
Step 3
- press to confirm.
Minute Minder - starts automatically after 5 sec.
After 90% of the set time the signal sounds.
Step 4
When the set time ends the signal sounds for 2 min. 00:00, - flash. Press any but‐
ton to stop the signal.
20/40
CLOCK FUNCTIONS
To Next Page
Loading...
