Why AEG KSK798280T Oven does not turn on or heat up?
If your AEG oven isn't turning on or heating up, first ensure it's properly connected to the electrical supply. Also, check if the clock is set. Make sure the oven door is fully closed. Verify that a blown fuse isn't the issue, and if it persists, consult a qualified electrician. Finally, check if the Child Lock is activated.
Why AEG KSK798280T Oven cleaning performance is not satisfactory?
If the cleaning performance of your AEG oven is not satisfactory, it might be because you started cleaning when the oven was too hot, so wait until the oven is cold and then repeat the cleaning. Another reason might be that you did not remove all the accessories from the oven before cleaning, so remove all accessories and repeat the cleaning.
What to do if there is too much water on the bottom of the AEG KSK798280T cavity after cleaning?
If there is too much water on the bottom of the AEG oven cavity after cleaning, it could be because you put too much detergent in the oven before you started cleaning. Next time, evenly spread a thin layer of detergent on the cavity walls.
What to do if the touch fields on my AEG KSK798280T Oven display (F240, F439) don't work properly?
If the touch fields on your AEG oven display are not working correctly (F240, F439), clean the surface of the display to remove any dirt from the touch fields.
What to do if my AEG KSK798280T has trouble with wireless network signal?
If you are experiencing trouble with the wireless network signal on your AEG oven, check your wireless network and router, and try restarting the router.
What to do if my AEG KSK798280T has a weak wireless network signal?
If your AEG oven has a weak wireless network signal, move the router as close as possible to the oven.
What to do if my AEG KSK798280T Oven's wireless signal is disrupted by a microwave?
If the wireless signal of your AEG oven is being disrupted by a microwave appliance placed nearby, turn off the microwave appliance.
What to do if my AEG Oven displays error F601 related to Wi-Fi signal?
If your AEG oven displays error code F601, which indicates a problem with the Wi-Fi signal, check your network connection.
What to do if my AEG Oven displays error F604 after the first Wi-Fi connection failed?
If your AEG oven shows error F604 because the first connection to Wi-Fi failed, turn the oven off and on, and then try again.
What to do if my AEG KSK798280T displays error F908?
If your AEG oven displays error F908, which indicates that the oven system cannot connect with the control panel, turn the oven off and on.
To Next Page
General
