3. Open the drain plugs of each tank
and empty them into a sink.
4. Press the catch on the back as
indicated in the picture and lift up
the top cover to remove it.
5.
Wash the drawer and all inserts
under running water.
CAUTION!
Do not use sharp or metal
brushes and sponges.
6. Turn the dispenser up side down and
open the bottom cover as indicated
in the picture.
7. Make sure that all detergent residue
is removed from the conveyor. Use
only soft damp clothes.
8. Put bottom cover back to its position
by aligning its holes on drawer hooks
as indicated in the picture. Close it
till "click" sound.
www.aeg.com
40
To Next Page
Loading...
