Why does my AEG Dryer stop soon after starting?
If your AEG Dryer cycle ends too quickly and the 'END' display lights up, it could be due to too little washing in the load or the washing being too dry for the selected program. Try selecting a time program or a higher drying level, such as INTENSIVE DRY instead of STORAGE DRY.
What to do if my AEG Dryer does not work?
If your AEG dryer isn't working, first, ensure the loading door is fully closed. If it is, try pressing the START/PAUSE button again to initiate the drying cycle.
How to troubleshoot AEG LAVATHERM T56830 that won't turn on?
If your AEG Dryer isn't turning on, first ensure that the mains plug is securely plugged into the socket. Also, check the fuse in your fuse box to confirm it's working correctly.
Why does the AEG LAVATHERM T56830 Dryer drying cycle last so long?
If your AEG Dryer is taking longer than usual to complete a cycle, the lint filter or heat exchanger might be clogged and require cleaning. Also, if you've pressed the SPECIAL CARE button, remember it's only suitable for loads up to 3.5 kg. Overloading the dryer or insufficient pre-draining of your laundry can also extend the drying time. Reduce the load volume and ensure laundry is adequately pre-drained.
How to fix an AEG LAVATHERM T56830 loading door that won't close?
If the loading door on your AEG Dryer won't close, check that the fine strainer is in place and the large mesh filter is correctly locked. Install the fine strainer and snap the large mesh filter into place to resolve this issue.
Why is my AEG LAVATHERM T56830 Dryer cycle taking so long?
An unusually long drying cycle on your AEG dryer can be due to several factors: * A clogged lint filter. Clean the lint filter. * A heat exchanger clogged with lint. Clean the heat exchanger. * The SPECIAL CARE button being pressed with too large a load. SPECIAL CARE is suitable only for loads up to 3.5 kg! * An oversized load volume. Reduce the load volume. * Laundry not sufficiently pre-drained. Ensure laundry is adequately pre-drained before drying.
Why are my AEG Dryer's drying results unsatisfactory?
If you're finding the drying results from your AEG Dryer unsatisfactory, several factors could be at play. First, ensure you've selected the correct program for your load. A clogged lint filter or heat exchanger can also impede drying performance, so be sure to clean them. Avoid overloading the dryer, and make sure the ventilation slots are not covered. Residue inside the drum can also affect drying, so clean the drum and ribs. Finally, the water conductance at your location might differ from the machine's standard setting; consider re-programming the drying level.
What to do if the AEG LAVATHERM T56830 shows 'EMPTY WATER'?
If your AEG Dryer displays 'EMPTY WATER' and the program is inactive, it means the condensate tank is full. Empty the tank, then press the START/PAUSE button to resume the program.
Why is my AEG Dryer button flashing when I press it?
If a button on your AEG Dryer flashes repeatedly when pressed, it indicates washing protection is active, meaning the option can no longer be set after the program starts. To resolve this, turn the program knob to OFF, then set the program again.
Why does the AEG LAVATHERM T56830 PROGRAMME TIME display change erratically?
The PROGRAMME TIME display on your AEG Dryer may change erratically because the program time is automatically adjusted based on the laundry type, volume, and dampness level. This is a normal automatic process and not a fault of the machine.
Safety precautions and intended use of the dryer.
Explanation of the dryer's control panel, programme selector, and displays.
How to turn on the dryer, open the door, and load laundry correctly.
How to choose programmes and optional functions like AUDIBLE SIGNAL.
How to select programmes, special functions like SENSITIVE, and set time delay.
Instructions for starting the programme and monitoring its progress.
Step-by-step guide to cleaning the dryer's micro-fine and fine fluff filters.
Solutions for issues related to poor drying performance.
Information and contact details for the Service Force support.
Contact information for general enquiries and product information.
General| Appliance placement | Freestanding |
|---|---|
| Rated capacity | 8 kg |
| Drying class | B |
| Energy Efficiency Class | B |
| Width | 600 mm |
| Height | 850 mm |
| Delay Start | Yes |
| Child Lock | Yes |
| Loading type | Front-load |
| Drying Programs | Cotton, Synthetics, Delicates |
| Dimensions (H x W x D) | 850 x 600 x 580 mm |
| Depth | 600 mm |
| Drying Technology | Condenser |
| Type | Condenser |
To Next Page