What to do if AEG LAVATHERM T57800 programme inactive, EMPTY WATER display illuminated?
If your AEG dryer displays 'EMPTY WATER' and the program is inactive, the condensate tank is likely full. Empty the tank, and then press the START/PAUSE button to restart the program.
What to do if my AEG LAVATHERM T57800 Dryer cycle lasts an unusually long time?
An unusually long drying cycle in your AEG dryer may be due to a clogged lint filter or heat exchanger, so start by cleaning those. If you've pressed the SPECIAL CARE button, remember it's only suitable for loads up to 3 kg. Overloading the dryer or insufficiently pre-drained laundry can also extend the cycle. Make sure to reduce load volume and ensure laundry is adequately pre-drained.
Why AEG LAVATHERM T57800 Dryer mains plug is not plugged in or fuse is not working correctly?
If your AEG dryer isn't starting, make sure it's properly plugged into the mains socket. Also, check the fuse in your fuse box to ensure it's working correctly.
What to do if AEG LAVATHERM T57800 loading door does not close?
If the loading door on your AEG dryer won't close, check that the fine strainer is in place and the large mesh filter is locked. Install the fine strainer and snap the large mesh filter into position.
Why AEG LAVATHERM T57800 drum light does not work?
If the drum light in your AEG dryer isn't working, first ensure the program selector is turned to LIGHT or any program. If it still doesn't work, the light bulb may be defective and needs replacement.
What does it mean when pressing a button, the corresponding button flashes several times on AEG LAVATHERM T57800?
If a button on your AEG dryer flashes repeatedly when pressed, it indicates washing protection is active. Turn the program knob to OFF and then set the desired program again.
Why AEG LAVATHERM T57800 PROGRAMME TIME display changes erratically?
The PROGRAMME TIME display on your AEG dryer changing erratically is part of the automatic process and not a machine fault.
Why AEG LAVATHERM T57800 Dryer drying results unsatisfactory?
Unsatisfactory drying results from your AEG dryer can stem from several causes. Ensure you've selected the correct program for your load. A clogged lint filter or heat exchanger can also reduce drying efficiency, so clean them. Avoid overloading the dryer, and make sure the ventilation slots are uncovered. Residue inside the drum can also affect drying, so clean the drum and ribs. You might also need to adjust the INTENSITY function.
Precautions to protect children from hazards related to the dryer.
Essential safety guidelines for general use and maintenance of the dryer.
Guidelines for sorting clothes by fabric type and care labels for drying.
Tips for preparing laundry to prevent tangling and improve drying.
Detailed steps for cleaning the micro-fine filter and fine strainer after each use.
Instructions for cleaning the large mesh filter and the surrounding filter area.
Guide to resolving common issues and error codes displayed by the machine.
Critical safety guidelines to adhere to during the appliance's installation.
General| Appliance placement | Freestanding |
|---|---|
| Capacity | 8 kg |
| Drying system | Heat pump |
| Drying technology | Heat Pump |
| Delay start | Yes |
| Child lock | Yes |
| Loading type | Front load |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
| Drying Programs | Delicate, Wool, Synthetics |
| Width | 60 cm |
| Depth | 600 mm |
| Height | 85 cm |
| Number of programs | 7 |
To Next Page